ARC 800

HBS | ARC 800 - M3 to M12 - #4 to 1/2“ - Stud welding machine, for thicker sheets of about 2 mm or higher. Method: Drawn arc with ceramic ferrule (ARC), Drawn arc with shielding gas (ARC), Short-cycle (SC). Suitable for : Mild steel, Stainless steel.

Technical data

Specifications

Welding range M3 to M12 (type RD), dia. 2 to 10 mm / #4 to 1/2“ (type RD), dia. 14 ga to 3/8“
Welding rate 7 to 17 studs/min (depending on application and stud dia.)
Welding current 800 A
Welding time 5 to 1 000 ms (stepless)
Primary power 400 V*, 3 phases, 50/60 Hz, 35 AT (slow blow) *alternative primary power see „Order No.“
Primary plug 32 A (at 400 V mains)
Connected load I1max = 31A
Cooling time F (temperature controlled cooling fan)
IP code IP 23
Dimension LxWxH (without handle) 470 x 230 x 220 mm / 18.50“ x 9.06“ x 8.66“
Weight 40 kg / 88.185 lbs
Suitable gun A 12, A 12-FL, A 16, CA 08
Order No. 93-10-0702A (400 V) 93-16-0702A (230/460 V) 93-15-0702A (575 V)

 

Features

Application
- Especially suitable for thicker sheets of about 2 mm or higher

Features
- Microcontroller
- Function monitoring
- Display of error codes
- Lift test

Safety
- Integrated mains filter
- Optimal for construction sites wih large mains voltage fluctuations
- EMC test
- Hig-voltage test with log
- Retriggering lock
- Thermal monitoring of transformer
- Temperature-regulated ventilator
- Consistent seperation of transformer and control unit
- Control unit galvanically seperaed from welding lines
- Cooling-air tunnel
- Optimal protection against external interferences
- Protection class IP 23

Order